Installing The Driver For The Ethernet Card; Installing The Driver For The Lpe16002B, Lpe1250, Or Lpe12002 Hba Card; Installing The Driver For The Qle 8242-Cu Cna Card - Lenovo ThinkServer TD340 Operating System Installation Manual

6. In the "Install Shield Wizard Complete" window, click Finish to restart your server.

Installing the driver for the Ethernet card

To install the driver for the Ethernet card, do the following:
1. Download the driver for the Ethernet card from the Lenovo Web site. If the driver is a compressed file,
unzip it to a folder. The most up-to-date device drivers for various server models are always available on
the Lenovo Web site at:
http://www.lenovo.com/drivers
2. Copy the folder that contains the driver to your USB storage device and connect the USB storage
device to your server.
3. Open the folder that contains the driver and double-click the Setup file.
4. In the Intel Network Connections window, select Install Drivers and Software.
5. In the "Welcome to the install wizard for Intel Network Connections" window, click Next.
6. In the License Agreement window, select I accept the terms in the license agreement and click Next.
7. In the Setup Options window, click Next.
8. In the "Ready to Install the Program" window, click Install.
9. In the Install Wizard Completed window, click Finish to restart your server.

Installing the driver for the LPE16002B, LPE1250, or LPE12002 HBA card

To install the driver for the EMULEX LPE16002B, LPE1250, or LPE12002 HBA card, do the following:
1. Download the driver for the HBA card from the Lenovo Support Web site. If the driver is a compressed
file, unzip it to a folder. The most up-to-date device drivers for various server models are always
available for download on the Lenovo Support Web site at:
http://www.lenovo.com/drivers
2. Copy the folder that contains the driver to a USB storage device and connect the USB storage device to
your server.
3. Open the folder that contains the driver and double-click the Setup file. The Click Next to Continue
window is displayed.
4. Click Next. The Installation options window is displayed.
5. Select the corresponding items depending on you need. Then, click Install. The Installation completed
window is displayed.
6. Select the corresponding item depending on you need. The following steps are based on the scenario
that Start AutoPilot Installer is selected in this step.
7. Click Finish. The EMULEX window is displayed.
8. Click Next.
9. When the installation is completed, click Next. Then, click Finish.

Installing the driver for the QLE 8242-CU CNA card

To install the driver for the QLOGIC QLE 8242-CU CNA card for the NIC, FCoE, and iSCSI protocols, do
the following:
1. Download the driver for the CNA card from the Lenovo Support Web site. If the driver is a compressed
file, unzip it to a folder. The most up-to-date device drivers for various server models are always
available for download on the Lenovo Support Web site at:
http://www.lenovo.com/drivers
.
Chapter 2 Installing an operating system in legacy mode
21