Installing The Driver For The Nvidia Nvs300/K600/Nvs315 Graphics Card; Installing A Vmware Esxi Hypervisor Operating System - Lenovo ThinkServer TD340 Operating System Installation Manual

13. Set your host name and domain name in the Hostname and Domain Name window. Then, click Next.
14. In the Network Configuration window, configure your network and click Next.
15. If the Test Internet Connection window is displayed, you can choose to test the Internet connection or
skip the test. Then click Next.
16. In the Network Services Configuration window, click Next.
Note: If a CA Management error message is displayed, select Do Not Create CA and Certificate, and
click Next. Click Yes to continue if Error appears.
17. In the User Authentication Method window, select a user authentication method, for example, Local
(/etc/passwd), and then click Next.
18. In the New LDAP User window, configure the settings and then click Next ➙ Yes.
19. In the Release Notes window, click Next.
20. In the Hardware Configuration window, click Next.
21. In the Installation Completed window, click Finish.
Note: If the YaST2 window is displayed, click Continue.
22. Follow the instructions on the screen to log in to the operating system.

Installing the driver for the NVIDIA NVS300/K600/NVS315 graphics card

To install the driver for the NVIDIA NVS300/K600/NVS315 graphics card, do the following:
1. Download the driver from the Lenovo Support Web site and copy the driver to a USB storage device. If
the driver file is a compressed file, unzip it to a folder. The most up-to-date device drivers for various
server models are always available on the Lenovo Support Web site at:
http://www.lenovo.com/drivers
2. Start the operating system, connect the USB storage device to your server, and copy the driver to the
/tmp directory.
3. Add the following kernel parameter to the /etc/grub2.cfg configuration file and restart the operating
system.
vga=0 rdblacklist=nouveau nouveau.modeset=0
4. Open the Terminal, and input init3 to enter the command-line window.
5. Enter your username and password.
6. Go to the driver path, and enter command sh sh
Wizard to complete the driver installation.
Note: NVIDIA-Linux-x86_64-346.47.run in the command represents the driver name. Use the
corresponding file name on your server.
7. Restart the operating system.

Installing a VMware ESXi hypervisor operating system

This topic provides instructions on how to install the following operating systems:
• VMware ESXi 5.1
• VMware ESXi 5.1 Update 1
• VMware ESXi 5.1 Update 2
• VMware ESXi 5.1 Update 3
• VMware ESXi 5.5
54
ThinkServer TD340 Operating System Installation Guide
sh NVIDIA-Linux-x86_64-346.47.run NVIDIA-Linux-x86_64-346.47.run . Then follow the
NVIDIA-Linux-x86_64-346.47.run