Installing The Suse Linux Enterprise Server 11 Operating System With Service Pack 4 - Lenovo ThinkServer TD340 Operating System Installation Manual

• The driver for the discrete graphics card does not support the Xen kernel.
2. Copy the driver from the USB storage device to the /tmp directory on your server.
3. Type the command init 3 and enter your user name and password.
4. Type the following commands:
cd /tmp
./NVIDIA-NVS300-Quadro600-Linux-x86-64-310.19.run
Note: In the command lines, NVIDIA-NVS300-Quadro600-Linux-x86-64-310.19.run represents the
driver name. Use the corresponding file name on your server.
5. When prompted, select Accept and press Enter.
Note: If you are installing the driver on the operating system (64-bit), when the message Install NVIDIA's
32-bit compatibility OpenGL libraries? is displayed, configure the settings and press Enter.
6. When the message Would you like to...... is displayed, select Yes and press Enter.
7. When the message Your X configuration...... is displayed, select OK and press Enter.
8. Restart the server and the driver installation is completed.
Installing the SUSE Linux Enterprise Server 11 operating system with
Service Pack 4
This topic provides instructions on installing the SUSE Linux Enterprise Server 11 operating system with
Service Pack 4 (x64 and x86).
To install the SUSE Linux Enterprise Server 11 operating system with Service Pack 4, do the following:
1. Insert the operating system installation disc into the optical drive that you have set as the first startup
device. Then, start the server from the optical drive.
2. In the "SUSE Linux Enterprise Server Welcome" window, select Installation, and then press Enter.
3. In the Welcome window, select your language and keyboard layout and then select I Agree to the
License Terms. Click Next.
4. In the Media Check window, click Next to go ahead.
5. In the Installation Mode window, select New Installation, and then click Next.
6. Verify your region and time zone, and then click Accept ➙ Next.
7. In the Server Base Scenario window, select Physical Machine(Also for Fully Virtualized Guests)
and then click Next.
8. When the Installation Settings window is displayed, create a drive partition you need.
• Manually create a root partition (/)
To create a root partition, do the following:
a. Click Partitioning and select Custom Partition (for experts). Click Next.
b. In the Expert Partitioner window, select Hard Disks from System view and select the drive (for
example, sda) for installing the operating system. Then, click Add.
c. In the New Partition Type window, select Primary Partition and click Next.
d. In the New Partitions Size window, select Custom Size.
e. Type the amount of space in the Custom Size field and then click Next.
f. In the Formatting partition area, select Ext3 from the File system drop-down list box.
52
ThinkServer TD340 Operating System Installation Guide