Advertisement
Fix the Front Landing Gear
with Hex Cap Screw 3x20MM.
3
Glue the tail with the body or fix
them with wood pieces by Self-
Tapping Screw 2x6mm .
like
5
Fix the parts on the carbon
fiber main frame like the
picture.
7
Use the screw from the Tripod to
lock the 100x18x6mm plastic pad on
the body.
1
Remove the tail and wait for
installed.
6
Fix the tail with the body and fix the
Tail Control Guide like the picture.
Install the Transition Tail Boom
and the Transition tail gearbox.
Fix the Back Landing Gear with
Self-Tapping Screw 3x10MM.
4
8
9
When you installed all of the
parts,Adjusted each Servo midpoint,
and the rod length.
2
Advertisement
