Table of Contents
Advertisement
Using Special Settings
Normally, you will not need to use Special Settings. Use these special settings only to adjust the
printer when it is not performing well in extreme conditions.
Two items are provided under the Special Settings.
High Precision Text Mode
Select to correct black characters that appear too bold because of ink running and spreading.
Low Temperature Print Mode
Select when the printer is being operated at low temperature.
Note
1
Click the Special Settings button.
The Special Settings dialog box opens.
2
Click on the checkbox of the desired feature so that it is checked.
●
The Special Settings cannot be set during a print job or when an error occurs.
●
Under normal circumstances the Special Settings checkbox should remain off.
The Low Temperature Print Mode especially should remain off and be used only
when necessary since this consumes a large amount of ink.
●
Using the High Precision Text Mode may cause poor balance in the dark areas of
images and cause other image problems.
●
Using the Low Temperature Print Mode may have little effect on print quality if the
room temperature is significantly lower than 15°C (59°F).
●
To release all the Special Settings (remove the checkmarks) and restore them to
their defaults, click the Defaults button, and then click the Send button.
How to Use the Printer Driver
3
64
Advertisement
Table of Contents
