Table of Contents
Advertisement
6.4
Print Results Are Unsatisfactory
If the print results are not what you expect, confirm the following points.
■ Random, Bizarre Characters Are Printing
A USB cable is disconnected.
The CX 350 printer driver is not selected
on the computer.
■ Print Quality Is Poor
Streaks appear on the printout.
White spots due to missing colors.
Printout is faint.
Check Point
Check Point
Troubleshooting
Solution
Check a USB cable and make sure that it is
connected to the printer and the computer.
Make sure that the CX 350 Printer is selected when
you start the print job.
Solution
If you are using the printer at low temperature, open
the Utility sheet in the printer driver then select the
Low Temperature Print Mode under the Special
Settings item.
Using Special Settings
Open the Utility sheet of the printer driver and
perform printhead cleaning.
Normal Cleaning
If normal cleaning does not solve the problem, then
perform deep cleaning.
Deep Cleaning
If deep cleaning fails to solve the problem, contact
the dealer where you purchased the printer or
contact the nearest service center.
Do the procedures for the two check points above,
"Streaks appear on the printout" or "White spots due
to missing colors."
6
114
Advertisement
Table of Contents
