Table of Contents
Advertisement
1
Before Using the Printer
Inside the Printer
(1)
(2)
(3)
(1) PHS open lever
Pull up to open the PHS door.
(2) PHS unit
Holds the printhead.
(3) Ink cartridges
There are 6 ink cartridges installed: Light Magenta (LM), Light Cyan (LC), Yellow (Y),
Magenta (M), Cyan (C), and Black (Bk).
(4) PHS stopper
Locks the printhead in place. Use it when moving or shipping the printer.
(5) Transport unit
Transports paper at high speed. Clean here if paper dust and ink stains.
●
●
Important
●
●
15
Never turn off the main power switch during a print job. This could cause damage
because the printhead cannot return to the home position.
Before you switch the printer off completely, press the
the printer in the sleep mode, and then press the main power switch.
An error may occur and a print job will halt if you open the front door, the PHS door,
or the feeder cover during a print job. This could also damage the printer.
Never attempt to open the PHS door by force or hit the door. This could damage the
printer or result in poor print quality. Always open and close the PHS door slowly.
(4)
(5)
STANDBY button to put
Advertisement
Table of Contents
