Call On The Bluetooth Phone - Toyota TNS 510 User Manual

OTHER FUNCTIONS
● Reconnecting the Bluetooth
Vehicles with smart entry and start
system—
If the Bluetooth phone is disconnected
®
with a poor
Bluetooth network when the "ENGINE
®
START STOP"
ACCESSORY or IGNITION ON mode,
the system automatically reconnects
the Bluetooth phone. In this case, the
®
connection result is not displayed.
If the Bluetooth is disconnected on purpose
®
such as you turned your cellular phone off,
this does not happen. Reconnect it by the
following methods.
● Select the Bluetooth
● Enter the Bluetooth
Vehicles without smart entry and start
system—
If the Bluetooth phone is disconnected
®
with a poor
Bluetooth network when the engine
®
switch is in ACC or ON position, the
system automatically reconnects the
Bluetooth phone. In this case, the
®
connection result is not displayed.
If the Bluetooth is disconnected on purpose
®
such as you turned your cellular phone off,
this does not happen. Reconnect it by the
following methods.
● Select the Bluetooth
● Enter the Bluetooth
136 TNS 510
phone
®
reception from
switch is in
phone again.
®
phone.
®
reception from
phone again.
®
phone.
®
— Call on the Bluetooth
phone
After you enter the Bluetooth
you can call by using hands-free system.
You can call using the 6 methods
described below.
● By dial
the
You can call by inputting the telephone
the number.
Touch the desired key to input the
telephone number.
Each time you touch ◄, an inputted digit
is deleted.
the
When you touch
called last is inputted.
Touch
wheel.
, the number you
or push of the steering
®
phone,
®
5E5323G