Touch Screen Operation - Toyota TNS 510 User Manual

● Memo information
This system notifies about a memo
entry. At the specified date, the memo
information will be displayed when the
navigation system is in operation. The
memo information screen will be displayed
every time the system is turned on.
The memo of the current date can be
viewed by touching "Memo". (See " —
Editing a memo" on page 127.)
To disable this screen, touch "Do not
redisplay this message". This screen
goes off if the screen is not operated
for several seconds.
To prevent this information screen from
being displayed again, touch "Do not
redisplay this message".
To register a memo information, see
"Calendar with memo" on page 124.

Touch screen operation

This system is operated mainly by the
touch-screen buttons on the screen.
To prevent damage to the screen, lightly
touch buttons on the screen with the
finger. When a button on the screen is
touched, a beep sounds.
Do not use objects other than your
finger to touch the screen.
● If the system does not respond to
a touch on a touch-screen button,
move the finger away from the
screen and then touch it again.
● Dimmed touch-screen buttons
cannot be operated.
1E5006G
● Wipe off fingerprints using a
glass cleaning cloth. Do not use
chemical cleaners to clean the
touch screen.
● The displayed image may become
darker and moving images may be
slightly distorted when the display
is cold.
● Under extremely cold conditions,
the map may not be displayed
and the data input by a user may
be deleted. Also, the touch-screen
buttons may be harder than usual
to depress.
● When you look at the screen
through polarized material such as
polarized sunglasses, the screen
may be dark and hard to see. If so,
adjust the screen settings on the
"Display" screen or take off your
sunglasses.
BASIC FUNCTION
INFORMATION
TNS 510
1
23