Toyota TNS 510 User Manual page 109

When the "Pop-up message" is turned
off, the following messages will not be
displayed.
This message appears when the system is
in the POI mode and the map scale is over
0,5 miles (1 km) or greater.
The message appears when the map is
switched to the dual map screen mode.
● Current position/tyre change cali­
bration
The current vehicle position mark can be
adjusted manually. Miscalculation of the
distance caused by tyre replacement can
also be adjusted.
1. Push the "MENU" button.
2. Touch "Navigation" on the "Menu"
screen.
3. Touch "Setup" on the "Navigation"
screen.
4E5071G
Then touch
the "Setup" screen.
4. Touch "Adjust" of "Calibration".
4E5072aG
5. Touch the desired button.
For additional information on the
accuracy of a current vehicle position,
see "Limitations of the navigation
system" on page 248.
ADVANCED FUNCTIONS
twice to display page 3 of
INFORMATION
TNS 510
4
4E5074G
109