Toyota TNS 510 User Manual page 61

• To change the route before starting
guidance
ROAD PREFERENCE
1. You can change road preference by
touching "Road preference".
2. Select the desired road preference by
touching the button.
When searching for a route, the system will
avoid routes when the indicator is off.
3. After choosing the desired road
preference, touch "OK".
INFORMATION
• Even if the "Allow motorway"
indicator is dimmed, the route
cannot avoid including a motorway
in some cases.
• If the calculated route includes a
trip by ferry, the route guidance
shows a sea route. After you
travel by ferry, the current vehicle
position may be incorrect. Upon
reception of GPSsignals, it is
automatically corrected.
3 ROUTES SELECTION
1. To select the desired route from three
routes, touch "3 routes".
2E5059G
2. Touch "Quick1", "Quick2" or "Short"
to select the desired route.
2E5060G
"Quick1": Recommended route.
This route is indicated by an light blue
line.
"Quick2": Alternative route.
This route is indicated by a purple line.
"Short": A route by which you can reach
the destination in the shortest distance.
This route is indicated by a green line.
"Info.": To display the following information
about each of the 3 routes
DESTINATION SEARCH
2E5061G
2E5062G
TNS 510
2
61