Toyota TNS 510 User Manual page 35

COMPASS MODE
Current vehicle position is indicated with a
compass, not with a map.
While on a different screen, touching
will display the compass mode screen.
Information about the destination and
current position, as well as a compass, is
displayed on the screen.
The destination mark is displayed in
the direction of the destination.
driving refer to the longitude and latitude
coordinates, and the compass, to make
sure that your vehicle is headed in the
direction of the destination.
INFORMATION
When the vehicle travels out of the
coverage area, the guidance screen
changes to the
screen.
1E5034G
When
compass mode
— Map scale
Touch or
the map display. The scale bar and indicator
at the bottom of the screen indicates the
map scale menu. The scale range is 50 m
(50 yards) to 500 km (300 miles).
Touch or
bar changes normally. By continuing to
touch the button, the scale bar changes
smoothly.
The scale of the map display can be
changed by touching the scale bar
directly.
If appears, you can change the map
scale to display the entire route to the next
destination by touching this button.
The map scale is displayed under the
North−up symbol or Heading−up symbol
at the top left of the screen.
INFORMATION
When the map scale is at the maximum
range of 500 km (300 miles),
not shown. When the map scale is at
theminimum range of 50 m (50 yards),
is not shown.
BASIC FUNCTION
1E5035G
to change the scale of
until the scale
is
TNS 510 35
1