Toyota TNS 510 User Manual page 204

AUDIO SYSTEM
4. Touch "SD".
5. Push the SD memory card lightly to
remove it.
The SD memory card will be ejected. An
SD memory card can then be inserted.
204 TNS 510
(b) Plugging or unplugging a USB
memory device
Vehicles with smart entry and start
system—
The "ENGINE START STOP" switch must
be in the ACCESSORY or IGNITION ON
mode.
Vehicles without smart entry and start
system—
The engine switch must be set at ACC or
ON position.
● Setting a USB memory device
Plug a USB memory device into the
port.
After insertion, the set USB memory device
is automatically loaded.