Call On The Bluetooth ® Phone - Toyota TNS350 Owner's Manual

OTHER FUNCTIONS
● Reconnecting the Bluetooth
Vehicles with smart entry and start
system—
If the Bluetooth phone is disconnected
®
with a poor
Bluetooth network when the "ENGINE
®
START STOP"
ACCESSORY or IGNITION ON mode,
the system automatically reconnects
the Bluetooth phone. In this case, the
®
connection result is not displayed.
If the Bluetooth is disconnected on purpose
®
such as you turned your cellular phone off,
this does not happen. Reconnect it by the
following methods.
● Select the Bluetooth
● Enter the Bluetooth
Vehicles without smart entry and start
system—
If the Bluetooth phone is disconnected
®
with a poor
Bluetooth network when the engine
®
switch is in ACC or ON position, the
system automatically reconnects the
Bluetooth phone. In this case, the
®
connection result is not displayed.
If the Bluetooth is disconnected on purpose
®
such as you turned your cellular phone off,
this does not happen. Reconnect it by the
following methods.
● Select the Bluetooth
● Enter the Bluetooth
140 TNS 350
phone
®
reception from
switch is in
phone again.
®
phone.
®
reception from
phone again.
®
phone.
®
— Call on the Bluetooth
phone
After you enter the Bluetooth
you can call by using hands-free system.
You can call using the 6 methods
described below.
● By dial
the
You can call by inputting the telephone
the number.
1. Push the "MENU" button.
2. Touch "Telephone".
the
3. Touch the desired key to input the
telephone number.
Each time you touch ◄, an inputted digit
is deleted.
When you touch
called last is inputted.
Touch or push
®
phone,
®
, the number you
of the steering wheel.