Canon MG5200 On-Screen Manual page 999

Printing Out Network Setting Information
Authentication
Signal Strength
TCP/IP Version
IP Address
Default Gateway
Subnet Mask*1
Subnet Prefix
Length*2
IPsec*3
Security Protocol*3
Printer Name
Shared Memory Card Memory card sharing
WSD
WSD Timeout
LLTD
LPR Protocol
Bonjour
Bonjour Service
Name
Bonjour LPR Service
IP Address Filtering
("X" represents an alphanumeric character ranging from 0 to 9 and A to F.)
*1 Only when IPv4 is selected on IPv4/IPv6 setting, the status of the network is printed.
*2 Only when IPv6 is selected on IPv4/IPv6 setting, the status of the network is printed.
*3 Only when IPv6 is selected on IPv4/IPv6 setting and Active is selected on IPsec settings, the
status of the network is printed.
Downloaded from ManualsPrinter.com Manuals
Method of the Authentication
Signal Strength
TCP/IP Version
Selected IP Address
Default Gateway
Subnet Mask
Subnet Prefix Length
IPsec setting
Method of the Security
Protocol
Printer name
WSD setting
Timeout
LLTD setting
LPR protocol setting
Bonjour setting
Bonjour service name
Bonjour LPR service
advertising
IP Address Filtering
none/auto/open/shared/WPA-PSK/WPA2-
PSK
0 to 100 [%]
IPv4/IPv6
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
XXX
Active
ESP/ESP & AH/AH
Printer name (Up to 15 characters)
Enable/Disable
Enable/Disable
1/5/10/15/20 [min]
Enable/Disable
Enable/Disable
Enable/Disable
Bonjour service name (Up to 48 characters)
Enable/Disable
Enable/Disable
Page 999 of 1037 pages
Page top