Singer SVC608 Instruction Manual page 8

ENGLISH
HOW TO FIT THE BRUSH
1. Fit the brush by carefully inserting it into the vacuum compartment.
2. Position the charging station close to a mains socket (well away from heat sources or wet
places). Insert the adaptor into the mains socket and connect the charging station.
VACUUMING FLOORS AND CARPETS
You should regularly check that the brush is clean in order to avoid scratching sensitive fl oors.
Start the device by pushing the on/off button away from you.
VACUUMING TABLES, FURNITURE, AND CAR SEATS, ETC.
Remove the hand unit by pressing in the release buttons. The hand unit will now come free and
can easily be removed.
EMPTYING/CLEANING
Careful cleaning of the dust container and fi lters
1. Remove the whole dust container by pressing the release button and turning the dust con-
tainer off.
2. Pulling out the fi lters and emptying the contents of the dust container into a suitable vessel
or bag.
(The fi lter can be shaken clean or cleaned and rinsed using warm water. Make sure that the
parts are dry before they are assembled.)
8