Protecting Images - Olympus E-P1 Instruction Manual

3
Use k to select a frame and press the i button.
• Repeatedly select images only for the number of frames
selected in Step 2.
• To cancel your selection, press the i button again.
4
Use hi to select an image, then use fg to
select the gain for each image. Press the i
button.
• Select from 0.1 to 2.0.
• The displayed image changes as the gain is adjusted.
5
Use fg to select [YES], then press the i
button.
TIPS
To overlay 4 or more frames:
j To overlay 4 or more frames, save the overlay image as a RAW file and use [IMAGE OVERLAY]
repeatedly.
x
Notes
• When the record mode is set to [RAW], the overlay image is saved as [YN+RAW].
• When selecting a frame to overlay, the JPEG images for images recorded in JPEG+RAW are
displayed.

Protecting images

Protect images you do not want to erase. Protected images cannot be erased by the single-
frame or all-frame erase function.
Single-frame protect
Play back the image you want to protect and press the 0
button.
• 9 (protect mark) is displayed on the top right corner of the
screen.
To cancel the protection
Display the images that are protected and press the 0
button.
IMAGE OVERLAY
RAW RAW RAW RAW
RAW RAW
RAW RAW RAW RAW
BACK SET
IMAGE OVERLAY
x 0.3 x 0.3 x 0.3 x 0.3 x 0.1 x 0.1
BACK SET
0 button
i button
RAW RAW
RAW RAW
7
91
EN