Olympus E-P1 Instruction Manual page 127

Monitor
indication
The internal temperature of the
m
camera has risen due to
sequential shooting.
Internal camera
temperature is too
high.
Please wait for
cooling before
camera use.
The battery is drained.
BATTERY
EMPTY
The camera is not connected to
the computer or printer correctly.
NO CONNECTION
There is no paper in the printer.
NO PAPER
The printer has run out of ink.
NO INK
The paper is jammed.
JAMMED
The printer's paper cassette has
SETTINGS been removed or the printer has
CHANGED been manipulated while making
settings on the camera.
There is a problem with the
printer and/or camera.
PRINT ERROR
Pictures recorded on other
cameras may not be printed on
this camera.
CANNOT PRINT
Possible cause Corrective action
Turn off the camera and wait for the
internal temperature to cool.
Wait a moment for the camera to turn off
automatically. Allow the internal
temperature of the camera to cool before
resuming operations.
Charge the battery.
Disconnect the camera and connect it
again correctly.
Load some paper in the printer.
Replace the ink cartridge in the printer.
Remove the jammed paper.
Do not manipulate the printer while
making settings on the camera.
Turn off camera and printer. Check the
printer and remedy any problems before
turning the power on again.
Use a personal computer to print.
12
127
EN