Olympus E-P1 Instruction Manual page 93

Single-frame erase
1
Display the images you want to erase and press the D
button.
2
Use fg to select [YES], then press the i button.
Erasing selected frames
During index display, you can select multiple images and erase them all at the same time.
1
Select the images you wish to erase on the index display, then press i.
• The selected images will be shown with v.
• To cancel your selection, press the i button again.
2
Press k to select the next images you want to protect, then press the i button.
3
After you have selected the images to erase, press the D button.
4
Use fg to select [YES], then press the i button.
All-frame erase
1
MENU [W] [CARD SETUP]
2
Use fg to select [ALL ERASE], then press the i button.
3
Use fg to select [YES], then press the i button.
• All frames will be erased.
TIPS
To erase immediately:
j If you have set "QUICK ERASE" (gP. 109) to [ON], pressing the D button will erase an image
immediately.
j You can set the initial position of the cursor to [YES]. g"PRIORITY SET" (P. 110)
D button
7
93
EN