Function; My Mode Setup; Button Timer; Flash Mode - Olympus E-P1 Instruction Manual

7 FUNCTION

Other functions can be assigned to the 7 button.
[AF MODE]
g"AF mode selection" (P. 56)
[METERING]
g"Changing the metering mode" (P. 49)

[FLASH MODE]

g"Flash shooting" (P. 73)
[BACKLIT LCD]
g"; FUNCTION" (P. 100)
[IMAGE STABILIZER]
g"Image stabilizer" (P. 62)

MY MODE SETUP

You can store two frequently used settings as My Mode. You can select which My Mode
setting to use in advance by following the steps under "Executing" below. To use My Mode,
set [; FUNCTION] to [MY MODE] and hold down the < button while shooting. g";
FUNCTION" (P. 100)
Registering
1) Select [MY MODE1] or [MY MODE2] and press i.
2) Select [SET] and press the i button.
• The current settings are registered in the camera. For details on the functions that can
be registered to My Mode, refer to "Functions that can be registered with My Mode and
Custom Reset Setting" (gP. 141).
• To cancel the registration, select [RESET].
Executing
1) Select [MY MODE1] or [MY MODE2] and press the i button.
2) Select [YES] and press the i button.
• The selected My Mode is set.
• When shooting, press the shutter button while holding down the < button.

BUTTON TIMER

The direct button may remain selected even after it is released.
[OFF]
[3SEC]/[5SEC]/[8SEC]
[HOLD]
• Buttons that can be set with [BUTTON TIMER]
ISO, F, WB, AF, jY
Do not retain selection.
The button remains selected during the number of seconds
indicated.
The button remains selected until you press it again.
9
101
EN