Exposure; Program Shooting - Olympus E-P1 Instruction Manual

2

Exposure

Program shooting

The camera sets the optimum aperture value and shutter speed automatically according to
the subject brightness.
Set the mode dial to P.
• When the shutter button is half-pressed, the shutter speed
and aperture value are displayed on the LCD monitor.
2
Shooting mode
LCD monitor
P
250 250 250 F5.6
Shutter speed
Program shift (%)
By turning the main dial (or sub dial) in the P mode, you
can change the combination of aperture and shutter
speed while maintaining the optimum exposure.
g"Program line diagram (P mode)" (P. 136)
• The program shift setting will not be cancelled after
shooting. To cancel the settings, turn the main dial
(or sub dial) until the shooting mode indication % of
the LCD monitor changes to P. Alternatively, turn off
the power.
• Program shift is not available when you are using a
flash.
TIPS
The shutter speed and aperture value are blinking:
j The optimum exposure cannot be obtained. For details, see "Exposure warning
display" (gP. 137).
44
EN
AF confirmation mark
L N N
3 8 3 8
F5.6
Aperture value
Program shift
P
s
250 F5.6 250 250 F5.6
L N N
3 8 3 8