Protecting Images - Olympus E-620 Instruction Manual

Protecting images
m
Protect images you do not want to erase. Protected images cannot be erased by the single-
frame or all-frame erase function.
Single-frame protect
Play back the image you want to protect and press the
0."
button.
• lOonI
(protect mark) is displayed on the top right corner of the
screen.
To cancel the protection
Display the images that are protected and press the
0."
button.
Protecting selected frames
On
button
e
button
This function lets you select multiple images and protect them all at the same time during
single-frame playback or index display.
1
Display the images you want to protect and press the
e
button.
• The selected images will be shown with'" .
• To cancel your selection, press the @ button again.
• During index display, press
0:0
to select the images you want to protect and press the @
button.
2
Press
0:0
to display the next images you want to protect and press the
e
button.
3
After you have selected the images to protect, press the
0."
button.
Canceling all protections
This function lets you cancel the protection of several images at one time.
1
MENU
~
[IE]
~
[RESET PROTECT]
2
Use
@ ®
to select [yES], then press the
e
button.
o
Notes
• Formatting the card erases all images even
if
they have been protected.
~"Formatting
the card" (P. 126)
• Protected images cannot be rotated even when the
IB
button is pressed.
•
91
EN