Easy Printing; Custom Printing - Olympus E-P1 Instruction Manual

2
Turn on the camera.
• The selection screen for the USB connection is displayed.
3
Use fg to select [PRINT].
• [ONE MOMENT] is displayed and the camera and
printer are connected.
Go to "Custom printing" (gP. 116).
x
Notes
• If the screen is not displayed after a few minutes,
disconnect the USB Cable and start again from Step 1.

Easy printing

1
Use hi to display the pictures you want to print on the camera.
• Display the image you want to print on the camera and
connect the camera with a printer using a USB cable.
The screen on the right appears shortly.
2
Press i.
• The picture selection screen appears when printing is
completed. To print another picture, use hi to select
the image and press the i button.
• To exit, unplug the USB cable from the camera while the
picture selection screen is displayed.

Custom printing

1
Follow the operation guide to set a print option.
Selecting the print mode
Select the type of printing (print mode). The available print
modes are as shown below.
[PRINT]
[ALL PRINT]
[MULTI PRINT]
[ALL INDEX]
[PRINT ORDER]
10
116
EN
Prints selected pictures.
Prints all the pictures stored in the
card and makes one print for each
picture.
Prints multiple copies of one image in
separate frames on a single sheet.
Prints an index of all the pictures
stored in the card.
Prints according to the print
reservation you made. If there is no
picture with print reservation, this is not available. (gP. 113)
USB
STORAGE
MTP
PRINT
EXIT
SET
EASY PRINT START
PC / CUSTOM PRINT
PRINT MODE SELECT
PRINT
ALL PRINT
MULTI PRINT
ALL INDEX
PRINT ORDER
EXIT SET
Follow the operation guide
displayed here.