Self-Timer Shooting; Image Stabilizer - Olympus E-P1 Instruction Manual

Self-timer shooting

This function lets you take pictures using the self-timer. You can set the camera to release
the shutter after either 12 or 2 seconds. Fix the camera securely on a tripod for self-timer
shooting.
For the setting method, see "Sequential shooting" (gP. 61).
Press the shutter button all the way.
• When Y12s is selected: First, the self-timer lamp lights
• When Y2s is selected : The self-timer lamp blinks for
3
• To cancel the activated self-timer, press the jY button.
x
Notes
• Do not press the shutter button while standing in front of
the camera; this could result in the subject being out of
focus since focusing is performed when the shutter
button is pressed halfway.

Image stabilizer

You can reduce the amount of camera shake that can occur when shooting in low light
situations or shooting with high magnification.
OFF Image stabilizer is off.
I.S. 1 Image stabilizer is on.
I.S. 2 This is used for panning with the camera in the horizontal direction to achieve a
blurred background. The horizontal image stabilizer is turned off, and only the
vertical image stabilizer is activated.
I.S. 3 This is used for panning with the camera in the vertical direction to achieve a blurred
background (tilting). The vertical image stabilizer is turned off, and only the
horizontal image stabilizer is activated.
Live control
Super control panel
Menu
62
EN
up for approximately 10
seconds, then it blinks for
approximately 2 seconds and
the picture is taken.
approximately 2 seconds, and
then the picture is taken.
i j:
[IMAGE STABILIZER]
i INFO k:
[IMAGE STABILIZER]
MENU [X]
[IMAGE STABILIZER]
Self-timer lamp
MENU button
INFO button
i button
j