Error Codes - Olympus E-P1 Instruction Manual

Error codes

Monitor
indication
NO CARD
CARD ERROR
WRITE PROTECT
CARD FULL
CARD FULL
CARD SETUP
Clean the contact area of
the card with a dry cloth.
CLEAN CARD
FORMAT
SET
NO PICTURE
PICTURE ERROR
THE IMAGE
CANNOT BE
12
EDITED
126
EN
Possible cause
The card is not inserted, or it
cannot be recognized.
There is a problem with the card. Insert the card again. If the problem
Writing to the card is prohibited.
The card is full. No more
pictures can be taken or no
more information such as print
reservation can be recorded.
There is no space in the card
and print reservation or new
images cannot be recorded.
Card cannot be read. Card may
not have been formatted.
There are no pictures on the
card.
The selected picture cannot be
displayed for playback due to a
problem with this picture. Or the
picture cannot be used for
playback on this camera.
Pictures taken with another
camera cannot be edited on this
camera.
Corrective action
Insert a card or insert a different card.
persists, format the card. If the card
cannot be formatted, it cannot be used.
The card write-protect switch is set to the
[LOCK] side. Release the switch.
gP. 130
Replace the card or erase unwanted
pictures.
Before erasing, download important
images to a PC.
Replace the card or erase unwanted
pictures.
Before erasing, download important
images to a PC.
• Select [CLEAN CARD], press the i
button and turn off the camera. Remove
the card and wipe dry the metallic
surface with a soft, dry cloth.
• Select [FORMAT] [YES], and then
press the i button to format the card.
Formatting the card erases all data on
the card.
The card contains no pictures.
Record pictures and play back.
Use image processing software to view
the picture on a PC.
If that cannot be done, the image file is
damaged.
Use image processing software to edit the
picture.