Shooting - Olympus E-P1 Instruction Manual

Shooting

1
Select a composition while
viewing the LCD monitor
2
Adjust the focus
Press the shutter
button halfway.
• The focus is locked, the AF confirmation mark appears, and the AF target appears at the
focus position.
• The shutter speed and aperture value that have been set automatically by the camera are
displayed.
3
Release the shutter
Press the shutter button all
the way (fully).
• The shutter sounds and the picture is taken.
• The card access lamp blinks and the camera starts recording the picture.
Never remove the battery or card while the card access lamp is blinking. Doing so could
destroy stored pictures and prevent storage of pictures you have just taken.
16
EN
LCD monitor
LCD monitor
P
AF target
250 F5.6 250 250
Shutter speed
AF confirmation mark
L N N
3 8 3 8
F5.6
Aperture value
Shutter button
Card
access
lamp