Changing The Settings For Movie Recording; Adding Effects To A Movie - Olympus E-P1 Instruction Manual

x
Notes
• When recording a movie, you cannot change the settings for exposure compensation and
aperture value.
• In movie mode, [IMAGE STABILIZER] provides electronic stabilization. When you use this
function, the recorded image is enlarged by a small amount. Also, [I.S.1] will operate
regardless of the settings for [I.S.1], [I.S.2] and [I.S.3].
• Stabilization is not possible when the camera shake is excessive.
• When using a lens with an image stabilization function, turn off the image stabilizer function of
either the lens or the camera.
• You cannot use [g FACE DETECT] in movie mode.
• With some types of media, you cannot record to the end of the available time and recording is
canceled automatically during operation. Also, the size of any given file is limited to 2 GB.
• When the inside of the camera becomes hot, shooting is automatically stopped to protect the
camera.
• You cannot make a further recording while the card access lamp is blinking at the end of a
recording.
• With some art filters, [C-AF] operation is limited.
• It is recommended to use a SD speed class 6 compatible card for movie shooting.

Changing the settings for movie recording

Adding effects to a movie

Live control
Menu
• Select using fg, then press the i button.
[P] Optimal aperture is set automatically
according to the brightness of the
subject.
[A] Depiction of background is changed by
setting the aperture. Turn the sub dial to
set the aperture.
[ART1]~[ART6] Movie is recorded with characteristics of
art filter mode.
g
i j [MOVIE AE MODE]
MENU [X] [MOVIE AE MODE]
"Setting the art filter/scene" (P. 5)
MOVIE AE MODE
MOVIE AE MODE
P
MOVIE+STILL
j Y
/ A
IMAGE STABILIZER ART1
MULTIPLE EXPOSURE ART2
ART3
BACK SET
6
P
OFF
o
OFF
OFF
79
EN