Image Stabilizer - Olympus E-P1 Instruction Manual

Taking pictures without
noise
Optimizing the LCD
monitor
Reducing camera shake
Taking pictures while
checking the level of the
camera
Set [NOISE REDUCT.] to [AUTO] or [ON].
To take pictures in a dark location, set [NOISE FILTER]
to [HIGH].
You can adjust the brightness of the LCD monitor.
During live view, set [LIVE VIEW BOOST] to [ON] to
make the subject easier to see without the exposure
reflecting on the LCD monitor.
Set the image stabilizer function.
Hold the camera firmly when pressing the shutter button.
When using a slow shutter speed, be sure to stabilize
the camera by using a tripod or similar method.
Use the external flashes.
Set the scene mode to [DIS MODE].
Increase the ISO sensitivity. When using the [AUTO]
setting, set the upper limit of [AUTO] to a higher value.
Using the self-timer can reduce camera shake that
occurs when the shutter button is pressed.
You can display the level gauge to check whether the
camera is level.
Display the ruled lines in live view. Compose the shot so
that the subject and ruled lines are horizontally and
vertically aligned.
P. 107
P. 107
P. 94
P. 104
P. 62
P. 17
P. 75
P. 5
P. 53,
P. 105
P. 62
P. 104
P. 41
35
EN