System expansions
Installing a hard disk drive
•
Requirement: remove the protective grille (see
EasyChange rails for a second hard disk drive are mounted on the drive cage.
► Secure the EasyChange rails on the side of the hard disk by inserting the upper pins
of the EasyChange rail in the corresponding holes on the hard disk.
► Slide the hard disk drive with the EasyChange rails into the drive cage in the direction of the
arrow (1). Ensure that the label on the 3½" hard disk drive is facing the side cover to be opened.
If you are installing a 2½" hard disk drive, ensure that the label is on the top.
58
"Removing the protective grille", Page
1
57).
Fujitsu