Installing And Removing The Accessible 5; Fitting The Drive Cover For The 5; Inch Drive; Inch Drive (Standard Size, Bottom Drive Bay) - Fujitsu CELSIUS R940 Operating Manual

Installing and removing the accessible 5

drive (standard size, bottom drive bay)
The following instructions apply only to the installation and removal of an
accessible drive in standard size, in the bottom drive bay.

Fitting the drive cover for the 5

• Requirement: The casing is open (see section
To use the latch function of the accessible 5
drive cover before installing the drive in the casing. Proceed as follows:
► Unlock the drive cover (1).
► Push the drive metal plate upwards (2) so it is released from the catches with which it is secured.
► Lift the drive cover away from the casing (3).
1
Fujitsu
/

inch drive

1
4
"Opening the casing", Page
/ inch drive, you must fit the corresponding
1
4
3
2
1
► Connect the drive cover to the drive (1).
System expansions
/ inch
1
4
33).
39