Screwing The Reader Onto The Module Holder; Installing A Module Holder With Reader - Fujitsu CELSIUS R940 Operating Manual

Screwing the reader onto the module holder

2
a

Installing a module holder with reader

► Push the module holder into the casing in the direction of the arrow (1) until the screw holes
on the casing and the screw holes on the reader are directly one above the other (1).
► Secure the module holder with the screws (2).
► Connect the cables to the boards and the mainboard. Make sure the polarity is correct.
► Close the casing (see
Fujitsu
2
a
1
"Closing the casing", Page
► With the component side facing downwards,
slide the reader in the direction of arrow (1)
into the guide on the module holder (a).
► Fasten the reader with the screws (2).
2
2
1
1
34).
System expansions
43