System expansions
Removing the module holder
•
Requirement: open the casing (see
► Disconnect the cables connected to the module holder.
► Remove the screws (1) on the module holder.
► Slide the module holder out of the casing in the direction of the arrow (2).
Screwing the reader onto the module holder
2
42
2
a
1
a
"Opening the casing", Page
1
1
► With the component side facing downwards,
slide the reader in the direction of arrow (1)
into the guide on the module holder (a).
► Fasten the reader with the screws (2).
36).
Fujitsu