Screwing The Smartcard Reader Onto The Module Holder; Installing The Module Holder With Smartcard Reader And/Or Wlan Module - Fujitsu CELSIUS W550 Operating Manual

Screwing the SmartCard reader onto the module holder

2
a
Installing the module holder with SmartCard reader
and/or WLAN module
► Push the module holder into the casing in the direction of the arrow (1).
► Fasten the module holder with the screws (2).
► Connect the cables to the boards and the mainboard. Make sure the polarity is correct.
► Close the casing (see
Fujitsu
2
a
1
"Closing the casing", Page
► Push the SmartCard reader - with the
component side facing downwards - into
the guide on the module holder (a) in
the direction of the arrow (1).
► Secure the SmartCard reader with
the screws (2).
2 2
1
35).
System expansions
41