4. Click Close to end the lights testing.
Switch imaging key lighting ON using Phoenix
Prerequisites
First go through steps 1-5 in
Steps
1. From Target partition, select SIDELED2.
2. From State partition, select On.
3. Set Level to 100 and click Write.
4. Click Close to end the lights testing.
Switching imaging key lighting OFF using Phoenix
Prerequisites
First go through steps 1-5 in
Steps
1. From Target partition, select SIDELED2.
2. From State partition, select Off.
3. Set Level to 0 and click Write.
Page 3 –54
Switching display lighting ON using Phoenix (page 3–49)
Switching display lighting ON using Phoenix (page 3–49)
COMPANY CONFIDENTIAL
Copyright © 2007 Nokia. All rights reserved.
BB Troubleshooting and Tuning Guide
if not done yet.
if not done yet.
RM-313
Issue 1