Page of 208
Download Table of ContentsContents Print This PagePrint Bookmark

Nokia RM-313 Service Manual: New Tools

Hide thumbs

Advertisement

RM-313
Service Tools and Service Concepts

New tools

The table below gives a short overview of service tools that can be used for testing, error analysis and repair
of product RM-313, refer to various concepts.
Reused tools
The table below gives a short overview of service tools that can be used for testing, error analysis and repair
of product RM-313, refer to various concepts.
Issue 1
FS-65
FS-65 has the following features:
• Provides galvanic connection to terminal test pads
• Provides standardized interface towards Control Unit
• Provides RF connection using galvanic connector or coupler
MJ-151
MJ-151 is meant for troubleshooting, testing, tuning and flashing on
the engine level (CU-4 supported).
The jig includes an RF interface for GSM, WCDMA and Bluetooth.
RJ-189
The jig is used for soldering and as a rework jig for the system module.
It is made of lead-free rework compatible material.
SA-106
SA-106 is an RF coupler for WCDMA and GSM RF testing. It is used
together with the product-specific flash adapter.
COMPANY CONFIDENTIAL
Copyright © 2007 Nokia. All rights reserved.
Flash adapter
Module jig
Soldering jig
RF coupler
Page 2 –5

Advertisement

This manual also for:

N82, L3, L4

Comments to this Manuals

Symbols: 0
Latest comments:
  • Pavel Kraemer Dec 31, 2016 03:20:
    I cannot find how to switch off front flash on NOKIA 230.
    Pleas​e inform to
    pkraemer@​volny.cz