Card basics (Cont.)
Inserting/ejecting the card
Inserting the card
3
Insert the card fully with the contact area
facing towards the monitor side (back of
the camera). Insert until you feel the card
locked into place.
● Note the orientation of the card. If it is
inserted incorrectly, it may become
jammed.
3
Ejecting the card
Push in the card lightly to unlock it, then
pull it out.
● NEVER open the card cover, eject the card, remove the batteries, or
disconnect the optional AC adapter while the camera is in use or the
camera is communicating with a computer. Doing so could destroy all
data on the card.
● Destroyed data cannot be restored.
1
Make sure the camera is turned off (i.e. the mode
dial is set to OFF).
2
Open the Card cover.
4
Close the cover tightly.
29