White Balance (Cont.)
Setting limitations and Default settings (White balance)
The setting for the White balance differs depending on the shooting mode
concerned as shown below.
Mode dial
(Mode menu)
S-Prg
P
A/S/M/
● No selection other than the default setting AUTO is available for the S-Prg
mode (the Night-scene mode has its own default setting). For the P and
A/S/M/
modes, the change in one shooting mode is forcibly applied to
other shooting modes.
● We recommend using AUTO for normal shooting.
● When setting the white balance by pointing the camera at white paper, the
setting may be incorrect if the light reflected by the paper is too bright or
dark.
● White balance may not be effective under some special light sources.
● After setting the white balance, playback the image and check the color on
the monitor.
124
Setting limitation
(–: Not available)
–
Any of the 4 preset White
balances are available.
Factory default setting
AUTO
Night-scene specific
setting
AUTO