Erasing Pictures
Recorded pictures can also be erased.
This can be done either one frame at a time or to all the pictures in the card.
Pictures on a SmartMedia card with a write-protect seal cannot be erased.
Once erased, pictures cannot be brought back.
Single-Frame Erase
This function only erases the picture displayed on the monitor. Erasing further
pictures must be done one-by-one if using this function.
1
Select a picture you wish to erase by using the arrow pad.
If the picture is protected, cancel the protection (P. 140).
2
Press the
(erase) button.
The
ERASE screen is displayed.
Ñ
3
Press
to select YES.
4
Press
to erase the picture.
To cancel erasing, select NO in step 3 and press
again.
ERASE
YES
N O
SELECT
GO
ERASE screen
, or press the
~
Continued on next page
button
141