Olympus C-3020 Zoom Reference Manual page 103

Metering modes — Metering the
subject brightness (Cont.)
Setting limitations and Default settings (Metering modes)
The setting for the Metering modes differs depending on the shooting mode
concerned as shown below.
Mode dial
(Mode menu)
S-Prg
P
A/S/M/
● No selection other than the default setting Digital ESP is available for the
S-Prg mode except for the Movie mode. For the Movie mode, Digital ESP or
Spot metering is available. The P and A/S/M/
any Metering mode. However, change in one shooting mode is forcibly
applied to other shooting modes except for
● For
mode, the setting can be changed separately from other shooting
modes.
● If the camera is set to manual focus, you cannot select the macro mode.
Setting limitation
(–: Not available)
–
Digital ESP or Spot metering
is available.
Any of the 4 Metering modes
are available.
Factory default setting
Digital ESP
modes allow you to select
mode.
~
Continued on next page
103