Olympus STYLUS TG-TRACKER - Digital Camera Quick Start Guide

Introduction

Please read these instructions carefully.
The camera you purchased is provided with the CD-ROM Instruction Manual.
For detailed information on all features and Provisions of warranty, please refer to the CD-ROM.
Adobe Reader is required to view the Instruction Manual.

Inserting and removing the battery and card

1. Keeping the battery/card compartment/connector cover latch pressed (), open the battery/card compartment/ connector cover ().

• When opening or closing the battery/card compartment/ connector cover, be sure the power switch is in the OFF position.
  Battery/card compartment/connector cover latch
  
  Battery/card compartment/connector cover

2. Insert the battery while sliding the battery lock knob in the direction of the arrow.

• Insert the battery as illustrated with the mark toward the battery lock knob.
  
  
• If you insert the battery in the wrong direction, the camera is not turned on. Be sure to insert it in the correct direction.
• Slide the battery lock knob in the direction of the arrow to unlock, and then remove the battery.

3. Insert the card straight until it clicks into place.

• Do not touch the metallic parts of the card directly.
• Always use the specifi ed cards with this camera. Do not insert other types of memory cards.
  
  The camera can only be used with a card inserted.
  Insert a card in the camera.

Charging the battery

1. Check that the battery is in the camera, and connect the USB cable and USB-AC adapter

• The battery is not fully charged at shipment. Before use, be sure to charge the battery until the indicator lamp turns off (up to 3.5 hours).
  

• Never use any cable other than supplied or Olympus-designated USB cable. This may cause smoking or burning.
• The included F-5AC USB-AC adapter (hereafter referred to as USB-AC adapter) differs depending on the region where you purchased the camera. If you received a plug-in type USB-AC adapter, plug it directly into AC outlet.
• Be sure the power switch is in the OFF position during charging.
• If the indicator lamp does not light, reconnect the USB cable and USB-AC adapter to the camera.

Turning on the camera

Rotate the power switch to ON.

• If the camera does not turn on when the power switch is in the ON position, check that the battery is in the correct orientation.
  

Setting the clock
The camera will prompt you to set the clock when fi rst turned on. Pictures can not be taken until the clock is set.

1. Use or to choose the year ([Y]) and press OK to select.
2. Using or and pressing OK as described in Step 1, set the month ([M]), day ([D]), and hours and minutes ([Time]).
3. Use or to select a time zone and press OK.

Recording movies

1. Rotate the power switch to ON.

• While the power switch is in the ON position, the camera will log GPS and other sensor data, including position and altitude. Log recording continues during shooting.

2. Check the mode.
   
   
3. Press the (record) button to start recording.
4. Press the button again to stop recording.

• If the power switch is rotated to OFF while the current log is stored in the temporary buffer, a message will be displayed in the monitor. If 10 seconds pass or you press OK while the message is displayed, log recording will end and the log will be saved to the card. If you rotate the power switch to LOG or ON before the 10 seconds are up, log recording will continue and the log will not be saved to the card.

Taking photographs

1. Rotate the power switch to ON.

• While the power switch is in the ON position, the camera will log GPS and other sensor data, including position and altitude. Log recording continues during shooting, and the log is saved to the card when the power switch is rotated to OFF.

3. Press the MODE button to view the home display.
   • Use or to highlight items.
4. Highlight [ PHOTO] and press OK.
5. Press the (record) button to take photos.

Viewing and deleting pictures

1. Rotate the power switch to ON.
2. Press the MODE button to view the home display.
   • Use or to highlight items.
3. Highlight [ PLAY] and press OK.
   • Pictures will be displayed in a thumbnail list.
   • Use and to highlight pictures.
   • Photos are indicated by a icon.

Viewing movies

1. Highlight the desired movie and press OK to view it full frame.
2. Press OK again to begin playback.

Viewing photographs

1. Highlight the desired photo and press OK to view it full frame.

Deleting pictures

1. In the thumbnail list, highlight the picture you want to delete and press the  button.
2. Use or to highlight [ Erase] and press OK.
3. Highlight [YES] and press OK.

Recording and saving logs

Rotate the power switch to LOG.

• Log recording will start. The indicator lamp lights green during recording.
• To switch to the shooting display, rotate the power switch to ON.

Saving logs
The current log is saved to the card when the power switch is rotated to OFF.

Connecting the camera to a smartphone

By connecting to a smartphone through this camera's wireless LAN function and using the specifi ed app (OI.Track, OI.Share), you can enjoy even more features during and after shooting.
For details, visit the address below:
http://app.olympus-imaging.com/oishare/
http://app.olympus-imaging.com/oitrack/

• If using the wireless LAN function in a country outside the region where the camera was purchased, there is a risk that the camera will not conform to the wireless communication regulations of that country. Olympus will not be held responsible for any failure to meet such regulations.

Important information about water and shock resistant features

Before Use:

After Use:

Storage and Maintenance

• Do not leave the camera in an environment at high temperature (40°C (104°F) or more) or at low temperature (–10°C (14°F) or less). Failure to do so may break down water resistance.
• Do not use chemicals for cleaning, rust prevention, anti-fogging, repairing, etc. Failure to do so may break down water resistance.
• Do not leave the camera in water for a long time. Prolonged exposure to water will cause damage to the camera's appearance and/or deteriorate water resistance.
• In order to preserve the water resistant feature, as with any underwater housing, it is recommended that the waterproof packing (and seals) are replaced annually. For the Olympus distributors or service stations where the waterproof packing can be replaced, visit Olympus website for your local area.
• The battery, cables, and USB adapter are not waterproof.

Checking the contents of the box

Other accessories not shown: Warranty card
Contents may vary depending on purchase location.

http://www.olympusamerica.com/
OLYMPUS AMERICA INC.
3500 Corporate Parkway, P.0. Box 610, Center Valley, PA 18034-0610, U.S.A. Phone 484-896-5000

Technical Support (U.S.A. / Canada)
24/7 onine automated help
http://www.olympusamerica.com/support
Phone customer support
Phone 1-800-260-1625 (Toll-free)
Our phone customer suppor is available from 9 am to 9 pm (Monday to Friday) ET
http://www.olympusamerica.com/contactus
Olympus software updates can be obtained at
http://www.olympusamerica.com/digital
To find the nearest Service Centers, please visit:
http://www.olympusamerica.com/digital
and click on the Worldwide Warranty icon at the bottom of the page.

Service Centers

©2016 OLYMPUS CORPORATION
Printed in Indonesia