Olympus C-3020 Zoom Reference Manual page 190

Troubleshooting (Cont.)
POSSIBLE CAUSES
5 Panorama shooting is
performed.
6 FUNCTION is set to
BLACK/WHITE BOARD.
Pictures you have already taken do not appear on the monitor.
1 The camera is in the
shooting mode.
2 There is no picture on
the SmartMedia card.
3 There is a problem with
the card.
1 The diopter is not
adjusted properly.
1 The brightness is not
adjusted properly.
2 The monitor is exposed
to direct sunlight.
Picture rotate, Picture protect, Single-frame erase, All-frame erase,
Print reserve and Card formatting cannot be performed.
1 A write-protect seal is
affixed to the
SmartMedia card.
190
CORRECTIVE ACTION
The flash does not fire.
5 Set PANORAMA to OFF in
the menus.
6 Set FUNCTION to OFF in
the menus.
1 Set the mode dial to
2 NO PICTURE appears on the
monitor. Record pictures.
3 See the error code chart.
The viewfinder display is not clear.
1 Adjust the diopter again.
The monitor is not clear.
1 Adjust the brightness.
2 Block the sunlight or move
out of the sunlight.
1 Use the card after peeling
off the seal. (Do not reuse
the write protect seal.)
REF. PAGE
P. 111
P. 109
. P. 130
P. 38, 39,
197
P. 196
P. 35
P. 83
P. 28