Olympus C-3020 Zoom Reference Manual page 96

Flash shooting (Cont.)
Setting limitations and Default settings (Flash intensity control)
The setting for the Flash intensity control differs depending on the shooting
mode concerned as shown below.
Mode dial
(Mode menu)
S-Prg
P
A/S/M/
No selection other than the default setting
mode. The P and A/S/M/
range of 2 to
applied to other shooting modes except for
For mode, the setting can be changed separately from other shooting
modes.
The flash adjustment effect may not be sufficient if the shutter speed is too
fast.
96
Setting limitation
(–: Not available)
–
The Flash intensity control does not work in the Movie mode.
Adjustable throughout the
range of 2 to
modes allow you to adjust throughout the
2. However, change in one shooting mode is forcibly
Factory default setting
2.
0 is available for the S-Prg
mode.
0
0