Erasing Pictures - Olympus MJU 300 Basic Manual

basic_e_opx_6.fm Page 35 Thursday, December 12, 2002 10:44 AM

ERASING PICTURES

This function enables you to erase recorded pictures. This can be done either
one frame at a time or to all the pictures on the card at once.
• Once erased, pictures cannot be restored. Check each picture
before erasing to avoid accidentally erasing pictures you want to
Note
keep.
Single-frame erase
1
Press .
• The monitor turns on.
2
Use the arrow pad to display the picture you want to
erase.
3
Press
• The top menu is displayed.
4
Press to select
5
Press to select YES, then press
• The picture is erased and the menu is closed.
All-frame erase
1
In the playback mode top menu, select MODE MENU
CARD CARD SETUP, and press
2
Press to select
3
Press to select YES, then press
• All the pictures are erased.
FORMATTING (CARD SETUP)
This function lets you format a card. Formatting prepares cards to receive
data. Before using non-Olympus cards or cards which have been formatted
on a PC, you must format them with this camera.
• All existing data, including protected data, is erased when the card
is formatted. Once erased, pictures cannot be restored, so make
Note
sure that you do not erase important image data. Download
important image data to a PC before formatting the card.
.
.
ALL ERASE, then press
.
.
.
En 35
En
.