Load (Fill) - Kurzweil Artis SE Musician's Manual

Storage Mode

Load (Fill)?

Load (Fill)?
The
Programs and User Multis from a device connected to the unit via USB. The loaded User
Programs and User Multis will fill any available location.
With the
loading from the selected device (USB or PC). If the device is not attached or not recognized,
the display will prompt you to connect the selected device or unplug and reconnect it.
Follow the instructions on the display. If PC was selected for the Device option, then the
Artis SE will appear as a removable disk/drive on your computer. Copy the file, containing
your previously saved User Programs and User Multis, from your computer into the Artis SE
removable disk/drive.
If USB was selected for the Device option, use the Param/Channel ▲ or ▼ buttons to select
the file to load from the list of files on the Artis SE display. For either device, pressing the
+
button will load the file, the display shows "
" File loaded.
Pressing Exit (or the
(Fill)?
If no file is in the Artis SE temporary drive during the load or an error occurs during the
load operation, then the display will show the error message,
specifying the reason for the error.
10-4
dialog allows you to load a file containing previously saved User
Load (Fill)? option selected, press the
"
–
button) will cancel the load operation and recall the
dialog.
+
button to begin the process of
File Loading... ", and when complete
Load Error
Load
and a message