Alpha Wheel & – and + Value Buttons
Use the Alpha Wheel, or the
Program. Turning the Alpha Wheel counter-clockwise or pressing the
the previous Program and turning the Alpha Wheel clockwise or pressing the + button will
select the next Program. When the highest or lowest Program is reached, the list will wrap
back to the last or first Program respectively.
When scrolling through the Program list, the list moves through each Category, both factory
and User.
Value Jump Buttons
In Program Mode, the Value Jump double button press selects the first Program of each
Category, as well as the Category Default Program of each Category (if a Category Default
Program has been set).
For more information on choosing a new Category Default Program for each Category, see
Choosing Category Default Programs on page 6-5.
If the User button is selected, Value Jump works the same way.
–
+
and
buttons below the Alpha Wheel, to change the current
Program Mode
Selecting Programs
–
button will select
6-3