Table of Contents
Advertisement
Global Mode
The Global Parameters
FX Select (FXSel)
The FX Select (FXSel) parameter determines how the Artis SE responds to interrupts with
regards to effects. You can set this parameter to either Performance or Multitrack.
With FX Select set to Performance, the Artis SE minimizes disruption of existing effects
when changing Programs, and entry values will not disrupt sustained notes when changing
Programs in Program Mode.
When controlling the Artis SE from an external sequencer in Program Mode, setting FX
Select to Multitrack will minimize effect disruption.
Pressing Value Jump (
Performance.
Auto Power Off
The Auto Power Off parameter turns the power saving feature on. When the Auto Power Off
parameter is set to Enable, the Artis SE will automatically power off after the Auto Power
Off Time has expired, from the last key press (physical or MIDI), button press, controller
movement, or USB MIDI activity.
Auto Power Off Time
If the Auto Power Off parameter is set to Enable, then the Artis SE will power off after the
time selected by the Auto Power Off Time parameter has elapsed.
The Artis SE will display warning messages, counting down before powering off.
Press a key or move any Artis SE control to dismiss the warning message. After dismissing
this message, the Artis SE will wait the selected amount of time before showing this warning
again.
Pedal Noise
Some piano Programs have a Pedal Noise feature programmed into the sound. This
parameter allows you to turn the Pedal Noise off if you prefer not to use it. If it is on, it will
only activate noise on those Programs that have been programmed to use it.
9-4
–
+
&
buttons simultaneously) will set this parameter to
Keyboard will power
off in 3 min
- Quick Links:
- Connecting MIDI
Hide quick links:
Advertisement
Table of Contents
