Kurzweil Artis SE Musician's Manual page 55

Program Mode
The Split Function
There are four parameters (described below) that determine the behavior of the Split. These
can be accessed by using the Param/Channel buttons.
Split Program
Move the Alpha Wheel or use a Category/Program button to select the Split Program.This
determines the Program for the left-hand side of the Split keyboard. Initially the last used
Split Program will be selected, or, if this is the first time using the Split Function since power-
up, the default Split Program (106 Motown Bass) will be selected.
Split Volume
Press the Param/Channel ▲ button to select the Split Volume parameter. This determines
the balance of the left and right-hand Programs. By default, the Split Volume is set to 0,
which results in both Programs having the same volume. When set to a positive number, the
volume for the right hand Program is decreased. When set to a negative number, the volume
–
for the left hand Program is decreased. To set the Split Volume, use the Alpha Wheel, or
+
and buttons. Split Volume can be set to any number between -127 and 127. Pressing the
Value Jump button pair resets the volume to 0.
6-7