Table of Contents
Advertisement
09
Troubleshooting
General
Problem
No Power
The Micro System
is not responding to
the Remote Control
No sound is heard
All buttons fail to
function
16
Possible Cause
1. The plug is not plugged
into the wall socket.
2. The wall socket is not
turned on.
1. The Micro System is
switched off at the
wall socket.
2. The Remote Control
is not directed at the
Micro System.
3. The front of the Micro
System is obstructed.
4. The Remote Control
batteries are
exhausted.
5. The Remote Control
batteries are
incorrectly inserted.
1. The volume is on the
minimum setting.
2. The volume is muted.
3. Headphones are
connected to the
Micro System.
1. A hardware error has
occurred.
What to do
1. Ensure the plug is plugged
into the wall socket.
2. Turn on the power at the wall
socket.
1. Turn on the power at the wall
socket.
2. Direct the Remote Control
towards the Micro System.
3. Ensure there are no objects
obstructing the Micro
System.
4. Replace the batteries in the
Remote Control. See page 6
for more information.
5. Ensure the batteries are
correctly inserted into the
Remote Control. See page 6
for more information.
1. Increase the volume.
2. Press the MUTe button to
restore the sound.
3. Remove the headphones.
1. Perform a hardware reset by
switching off the power on
the rear of the Micro System.
Wait 60 seconds and then
switch it back on again.
Advertisement
Table of Contents
