Goodmans MICRO1109IP User Manual page 13

CD Playback
Program Track Selection
You can program the micro system to
play up to a total of 99 tracks/files in
any desired order. You can also program
the same track/file to play several times
within a program sequence.
While in CD mode, press the ■
button to stop any CD playback.
Press the PROG button. 000 P-01
willl be displayed.
• P01 - stands for the first program
location.
• 001 - is the track or file number.
Select the track or file for the first
program location using the I   and
  I buttons.
Press the PROG button to store
the selected track/file in the first
program location.
Repeat steps 3 and 4 to program
more tracks or files.
Once you have selected all the
tracks, press the button to start
playback.
DON'T FORGeT! Playback will
stop after all track/files have been
played.
To cancel the sequence from the
memory, press the ■ button during
playback.
06
13