Ipod Docking - Goodmans MICRO1109IP User Manual

05

iPod Docking

Any iPod can be connected to the
Micro System allowing all your favourite
songs to be played through the Micro
System's speakers. The iPod can be
completely controlled by the Micro
System and charges when docked.
To connect an iPod to the Micro
System, select the compatible
adaptor from one of the 8 iPod
adaptors supplied. The iPod adaptors
have markings on the bottom which
clearly identify which iPod they
should be used with.
DON'T FORGeT! If your iPod is not
compatible with any of the supplied
iPod adaptors, use the adaptor
supplied with your iPod.
10
Place the iPod adaptor into the
recess on the top of the Micro
System and then insert your iPod
into the adaptor.
To disconnect the iPod, turn it off and
disconnect it from the dock.
DON'T FORGeT! Your iPod will
charge while docked when the
Micro System is in Standby Mode.
The following instructions describe how
to operate an iPod when it is connected
to the Micro System using the Remote
Control.
Selecting iPod Mode:
Press the STANDBY button.
Press the FUNCTION button until
iPod is selected.
To start playback, press the IPOD
PlAY/PAUSe button.
Menu Navigation:
To access the iPod menu system,
press the I-MeNU button.
Use the ▲ or ▼ buttons to highlight
the menu options.
Press the eNTeR ST/MO button to
select a menu option.